Desktop Mini Lab Extruder For New Material Spline
Key Techniacal Parameters of Mini Lab Extruder
| Screw Diameter (mm): |
20/53 |
Screw Thread Length (mm): |
190/250 |
| The Screw Rotation Speed (rpm): |
70/51 |
Main Motor Power( Kw): |
0.75 |
| Circulating Extrusion Dosage (g/per Time): |
15-18(auto Control) |
Direct Extrusion Dosage (max Kg/h): |
1.5 |
| Key Technical Parameters |
SJZS-7A |
SJZS-10A |
SJZS-10B |
SJZS-10Z |
| Screw diameter (mm) |
7/25 |
10/30 |
10/30 |
10/30 |
| Screw thread length (mm) |
190 |
190 |
250 |
190 |
| The screw rotation speed (rpm) |
70 |
51 |
51 |
51 |
| Barrel form |
Can open |
Can open |
Can open |
Can open |
| Main motor power( kw) |
0.55 |
0.75 |
0.75 |
0.75 |
| Circulating extrusion dosage (g/per time) |
5-10(manual control) |
15-18(auto control) |
15-18(auto control) |
without |
| Direct extrusion dosage (max kg/h) |
0.45 |
1.5 |
1.5 |
1.5 |
| Heating temperature (max ℃) |
450 |
450 |
450 |
450 |
| Feed 1 power (W) |
without |
25(optional) |
25 |
25 |
| Feed 2 power ( W) |
without |
without |
25 |
without |
| Power of vacuum exhaust and dehumidification device (W) |
without |
without |
180(optional) |
without |
| Nitrogen protection |
have |
have |
have |
have |
| size (mm) |
800X350X580 |
800X350X580 |
850X350X580 |
800X350X580 |
| Key Technical Parameters |
SJZS-20 |
SJZS-20A |
| Screw diameter (mm) |
20/40 |
20/53 |
| Screw thread length (mm) |
390 |
480 |
| The screw rotation speed (rpm) |
0-50 |
51 |
| Barrel form |
Do not open |
Do not open |
| Main motor power( kw) |
1.5 |
2.2 |
| Circulating extrusion dosage (g/per time) |
without |
without |
| Direct extrusion dosage (max kg/h) |
6 |
6 |
| Heating power (kw) |
4.5 |
5 |
| Feed 1 power (W) |
25(optional) |
25 |
| Feed 2 power (W) |
without |
25 |
| Power of vacuum exhaust and dehumidification device (W) |
250(optional) |
250(optional) |
| Nitrogen protection |
have |
have |
| Size (mm) |
1020x450x600 |
1120x450x600 |
Mini lab extruder
Features:
1. Low amount of raw materials, low energy consumption, especially for some valuable raw materials test research
2. Easy to operate, good plasticizing and dispersing performance, can be carried out regular cycle extrusion or continuous extrusion
3. Small size, light weight, can work on the test bench, and the process of inert gas protection
4. Can replace the different head and the corresponding auxiliary machine, in a continuous extrusion state can do plastic tube, blowing, film, sheet, profile, spinning, granulation, coating and other plastic products
5. Can be used with our micro-injection molding machine, the material can be sent directly into the extruder into the injection box injection box, and directly facilitate the injection molding required spline
6. The use of different feeding device can use micron, nano-powder, fish seeds and granular raw materials extrusion.
7. Different shapes of different raw materials using a number of feed and the main motor and the proportion of the feed motor can make the dispersion of raw materials to achieve the best results.
Product Tags:
|
|
Dia 40mm 1.5kg/H Desktop Mini Lab Extruder For Spline Images
|
